
Why it
works.
A slim bar of soft light over the bed or along the hall, so both sides of the bed are lit and the nightstands stay free.
Sized to your bed.
The 60 cm (23.6 in) bar suits a single bed or a corridor; the 80 cm (31.5 in) bar spans a double bed. Both light a space of 10 to 15 m².
No dots, no glare.
A PVC shade turns the built in LED into one continuous strip, and the frosted aluminium body keeps a matte, low glare surface. Choose warm white, cool white or a three colour version.
No cord on the wall.
Bea is hardwired on 110 to 220V and switches from the wall like a ceiling light, so a qualified electrician should fit it. Mark the centre of the bed first, since a linear fixture shows any offset.
Space Applications
Where to use the Bea Linear LED Wall Light

Bedroom
Mounted over the headboard, it lights both sides of the bed.

Hallway
A slim line of light that keeps a narrow corridor clear.

Living Room
Soft, even light along the wall above a sofa.

Guest Room
Wall switch control, with no lamp cords on the nightstands.
DecorsPlus size guide
Wall light size guide
Wall lights look best at the right height and spacing. Use these measurements as a starting point.
Sizes of this product
Every size we offer, with the measurements and the rooms it suits best.
| Size | Measurements | Best for |
|---|---|---|
| L 60 cm | 60 cm (23.6 in) long | Above a headboard, hallway, guest room |
| L 80 cm | 80 cm (31.5 in) long | Above a wider headboard or a sofa, living room |
- In a hallway or living room, mount it about 150 to 170 cm (60 to 66 in) from the floor. Beside a bed, about 50 to 75 cm (20 to 30 in) above the mattress.
Just above eye level
Most wall lights look right when their centre sits a little above eye level.
| Where | Height of the centre of the light |
|---|---|
| Living room or hallway | 150 to 170 cm (60 to 66 in) from the floor |
| Along stairs | 150 to 180 cm (60 to 72 in) above the step |
| Above a picture or a mirror | 15 to 20 cm (6 to 8 in) above the frame |
Bedside and mirror lights
| Where | Height | Spacing |
|---|---|---|
| Bedside reading light | 120 to 150 cm (48 to 60 in) from the floor | Centred over each nightstand |
| Either side of a mirror | 150 to 165 cm (60 to 66 in) from the floor | 75 to 100 cm (30 to 40 in) apart |
| Above a mirror | 190 to 200 cm (75 to 80 in) from the floor | About two thirds of the mirror width |
- In a bathroom, choose a light made for damp rooms and follow local wiring rules.
How many and how far apart
- Along a hallway, place one light every 2.4 to 3 m (8 to 10 ft).
- Keep at least 15 cm (6 in) from a corner or a door frame.
- Use pairs to frame a bed, a sofa, a fireplace or a mirror.
- A light about one third as wide as the furniture it frames looks balanced.
Good to know
Still not sure?Send us your room measurements and we will suggest the right size.
Contact usFrequently Asked Questions
Which length should I choose?
The 60 cm (23.6 in) suits a single bed, a narrow wall or a corridor, while the 80 cm (31.5 in) suits a double bed or a wider stretch of wall. Both light a space of 10 to 15 m².
What light colours are available?
Warm White, Cool White and Three Colour. Three Colour lets you move between warm, neutral and cool tones, while the other two give one fixed light colour.
How is it switched on?
Bea is controlled by your wall switch, so it turns on and off like a ceiling light, with no cord or plug on the wall.
What is it made of?
The body is aluminium with iron parts, finished in frosted spray paint, and the shade is PVC, which softens the LED into an even line of light.
How is it installed?
Bea is hardwired and comes with installation hardware. It runs on 110 to 220V. Have a qualified electrician install it.
Wall Collection
Light at
Eye Level
Sconces for the bedside, the hallway and the mirror, fixed to the wall so the table stays clear.

One Sconce for Every Spot
Where It Goes

Reading
The Juno cone points down from a brass arm and puts a pool of light on the page.

Mirror
The polished Soren dome bounces its glow back across the wall, best as a pair.
On the Wall
Fixed to
the Wall
A wall light frees the bedside table and puts the light where you need it, at the height of a book or a mirror. Every sconce here is wired into the wall, so there is no cord running down to a socket.
The shapes do the work: Juno narrows its beam onto the page, Soren turns the wall into part of the light, and Dara aims one shade up and one shade down.
- Clear SurfacesWith the light on the wall, the nightstand and the console stay free.
- Light Where You ReadJuno and Nico put a defined pool of light onto the page.
- Best in PairsAva and Soren look their best either side of a bed or a mirror.

From the Collection
Shop the Collection
Core Advantages
Why Choose This Collection
Wired In, No Cord
Each sconce is wired into the wall, so nothing trails down to a socket.
Built In LED
Ava and Dara run on integrated LED, with no bulb to source.
Finishes to Choose
From the deep space blue of Juno to the rose gold of Soren and the copper of Nico.
Fitted by a Pro
Have a qualified electrician fit them; Nico sits in a recessed cut out.
Before You Choose
Questions, Answered
Do they plug in?
Which one is best beside a bed?
How much light do they give?
Does Nico need a special wall?

“A light on the wall leaves the table to you.”
For a bedside, a hallway or a mirror.
Keep Exploring
Lighting and decor chosen room by room, so you can finish the space you are working on.













